What are the usage rules for lithium battery electric locomotives?

Date:2022-10-19

What are the usage rules for 2.5 ton lithium battery electric locomotives

1. Make sure that the safety-related parts of the lithium battery electric locomotive can work normally, such as warning lights, horns, braking devices, electrical protection systems, gas power-off meters, etc. It is recommended to drive after handling any problems.

2. Before driving, you must check the surrounding environment. After confirming that there are no obstacles such as people or items, first send a driving signal and then start the lithium battery electric locomotive to avoid accidents or losses.

3. When receiving signals from other electric locomotives or personnel, you should obey the command and make corresponding actions, and at the same time respond to the other party to indicate receipt. This article is not only for the driver, other personnel in the mine should also understand the meaning of the signal.

4. Do not drive too fast. When turning, exiting a hole, or when there are people in front of you, you should sound the horn to give a signal, and slow down at the same time.

5. If the lithium battery electric locomotive suddenly needs to change lanes or make a U-turn on the way, it should send a signal to remind the surrounding, and report it to the dispatching room at the same time, so that the dispatching room can make arrangements.

6. Overloading is prohibited. Overloading is not only dangerous, but in the long-term, it will speed up the service life of the electric locomotive.

7. When transporting items such as equipment or explosives, the corresponding transport regulations shall be followed.

8. When transporting people, it is necessary to check the status of the electric locomotive and whether there is any problem with each part. It is strictly forbidden to mix goods, especially inflammable and explosive goods, in the car, and it is also forbidden to pick up the car halfway.

9. There should be a device to block the car in the loading and unloading place to further avoid the car slipping.

10. Do a good job in daily maintenance, park the electric locomotive in the specified area, and make sure that the power supply has been cut off and the brakes are tight.