3 Ton Underground Mining Trolley Locomotive uses cables to provide energy for the locomotive. After the high-voltage alternating current is stepped down and rectified by the transformer the positive pole is connected to the cable and the negative pole is connected to the track. The current flows into the locomotive through the cable that is in contact with the pantograph and then flows through the automatic air switch controller and resistance box and finally enters the traction motor to drive the motor to run. The motor drives the wheels to rotate through the transmission device and uses the friction between the wheels and the rail surface to make the locomotive move. The current finally flows out of the motor and flows back to the transformer through the track.
Video
Video
 |
Model | CJY3/6、7、9G(B) | |
| Weight | 3 ton | ||
| Track gauge | 600、762 or 900mm | ||
| Traction force | 5.74kN | ||
| Max traction force | 7.36kN | ||
| Speed | 7.5km/h | ||
| Dc voltage | 250V | ||
| Motor power | 6.5kW×2/ 7.5kw*2 | ||
| Dimensions | Length | 2750mm | |
| Width | 940、1082 or 1220mm | ||
| Height | 1550mm | ||
| Wheelbase | 850 mm | ||
| Wheel diameter | Φ520 mm | ||
| working height of Pantograph | 1800~2000mm | ||
| Min turn radius | 6m | ||
| Control method | Resistance or IGBT | ||
| Brake method |
Mechnical or hydraulic |
||
←No Information
