What Are the Daily Maintenance and Care Methods for Explosion-Proof Xiangtan Electric Locomotives?
Proper daily maintenance and care are essential to ensure the safe and efficient operation of explosion-proof Xiangtan electric locomotives. The following are key practices to keep in mind:
Inspection of the Sanding System: Check that all components of the sanding system are complete and securely connected. Ensure that the sand tubes are not clogged, are aligned with the center of the track, and that the distance between the tubes, wheels, and track meets the required standards.
Examination of the Power Collector: Verify that the spring pressure of the power collector is sufficient. Inspect the sliding plates for any fractures or excessive wear. Also, ensure that all frames, bolts, and pins are intact and securely fastened.
Resistor Inspection: Check for any cracks in the resistors and ensure that all terminal connections are tight. Clean off any accumulated dust and debris from these components.
Motor and Axle Box Check: After the locomotive is taken out of service, immediately inspect the traction motor, axle boxes, and oil tank. Confirm that the motor temperature does not exceed 75°C and that the axle box temperature remains within the limit of 65°C. Clean out any dust from the oil tank, and regularly lubricate or replace the oil as needed.
Lighting Check: Ensure that all lighting fixtures are functioning properly and provide adequate brightness. The fuses should meet the required specifications.
These are the essential daily maintenance and care methods for explosion-proof Xiangtan electric locomotives, helping to ensure safe and reliable operation.
