underground 3.5 tonne gold mine battery locomotive Pricelist

Before running the battery electric locomotive, check the locomotive axle box, motor bearing, and gear box bearings. They should not be overheated. The driver can judge whether these bearings will burn out by the smell of burnt. Pay attention to the normal operation of the braking system at any time. When the brake shoe is adjusted normally, the braking distance should not exceed the specified distance. When the electrical equipment, lighting, and horn fail, the locomotive must be sent to the garage for repair. When the driver is handed over at the end of the work, he should conduct a comprehensive inspection of the locomotive, and record the inspection of the locomotive in the shift book.
1. Introduction Of Product Model 
3.5 Ton battery locomotive means the weight of locomotive is 3.5 ton, the power supply type is battery.  The loading capacity is 35 Ton ores.

2. Product Structure

The electric locomotive is roughly divided into two parts: the driver's cab and the body.The driver’s cab is the control center of the electric locomotive, where the master controller, brake switch, sanding switch, gas cut-off device, electronic horn switch, lighting (warning) light switch, electronic horn and lighting (warning) light are placed in the driver’s safety Above the front of the room.The body is the main body of the electric locomotive, in which the electric motor, spring bracket, reduction box, wheel set, brake device, and sanding device are placed, and the battery or pantograph is installed above the body.

Locomotive Avantage Please Click: Locomotive Advantages.

Operation Video:



Coal mines generally use explosion-proof special mining electric locomotives. Because there are basically different concentrations of gas in coal mines, it is not only for the long-term normal operation of mining electric locomotives in coal mines, but also for safety. Must use explosion-proof special mining electric locomotive.